DK-Lok Canada
Navigation
=
About DK-Lok Canada Ltd
Message From the President
Locations
Vision & Mission Statement
Services & Industries
Products & Quality Assurance
Valves
Ball & Plug Valves
Check and Relief
Metering and Bellow Valves
Needle and Regulator Valves
Toggle and Rising Plug Valves
Bleed and Purge Valves
Diaphragm and Gauge Valves / Manifolds Filters
Filters
Fittings
Tube Fittings
Z Series Tube Fittings
Instrumentation Pipe and Weld Fittings
Hydraulic Pipe Fittings
Bite Type Tube Fittings JIS
Bite Type Tube Fittings DIN
DO Series O-Ring Face Seal Fittings
K Series JIC Tube Fittings
Hose Adapter Fittings
Push-On Hose Fittings
Clean Fittings
Quick Connector
Quick Connectors
Full Flow Quick Connectors
Receptacle
Tube and Hose
Tube
Flexible Metal Hose
Tools
Hydraulic Swaging Unit DHS
Electric Swaging Unit DES
Preswaging Tool DPS
Gap Gauge DIG
Tube Depth Marking Tool DTM
Quality Assurance
System
Classification
Certification
Contact Us
Technical Drawings
Home
Products & Quality Assurance
Technical Drawings
Search Catalog
By Keyword
By Item #
All Categories
DTM Tube Depth Marking Tools
All Categories
>
Compression Tube Fittings
>
Tools
>
DTM Tube Depth Marking Tools
>
DTM Tube Depth Marking Tools
>
Item # DTM-6-C-L825
Download PDF
Download PDF
Printable Page
Email This Page
Save To Favorites
Please wait…
Item # DTM-6-C-L825, DTM Tube Depth Marking Tools
larger image
Specifications
·
Dimensions
·
Operation Instructions
Specifications
Z Series Ferrule
No
Material
Alloy 825
Moly Coating
None
Dimensions
D - Tube O.D.
3/8
in
Operation Instructions
1. Insert tubing into DTM until it is bottomed on tool.
2. Mark the tube at the top of the DTM with a pen.
3. Remove the tube from the DTM and insert into fitting until it is bottomed on the shoulder of the fitting body.
4. If the marking can be seen above the fitting nut, it indicates the tube not fully bottomed inside the fitting.
DOWNLOADS
Tube Fitting - Brochure
Installation Instructions
(PDF, 136KB)