Search Catalog
        
 All Categories    DEU Dielectric Fittings
All Categories > Compression Tube Fittings > Additional Products > DEU Dielectric Fittings > DEU Dielectric Fittings > Item # DEU-6-IN  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # DEU-6-IN, DEU Dielectric Fittings


Di-electric tube fitting is designed to apply where electrical current flowing through a pipe or tubing line must be interrupted to protect instruments.
Di-electric Tube fitting is commonly used in the natural gas transmission station where installed on impulse lines ahead of stations. This fitting interrupts cathodic current flow while permitting full fluid flow.




Specifications  · Dimensions  · Materials  · Technical Data

Specifications

Z Series Ferrule
No

Material
Alloy 600

Moly Coating
None


Dimensions

D - Tube O.D.
3/8 in
9.5 mm

E - Min.
0.280 in
7.1 mm

h - Width Across Flat
5/8 in
15.9 mm

H - Width Across Flat
11/16 in
17.5 mm

H1 - Width Across Flat
7/8 in
22.2 mm

H2 - Width Across Flat
13/16 in
20.6 mm

A
16.8 mm

L
99.6 mm

L1
65.8 mm


Materials
1. Insulator: Molded Thermoplastic
2. O-ring: 90 Durometer FKM
3. Back Up Ring: Virgin PTFE
  • Body, Ferrules, Nuts: Stainless Steel 316


Technical Data
  • Pressure Rating: 4,000 psig (275 bar) at 70°F (21°C)
  • Temperature Rating: -40 to 200°F (-40 to 93°C)
  • Electrical Resistance at 70°F (21°C): 10x106 Ohm at 10 Volts DC
  • Voltage breakdown resistance 3,000 Volts DC


 MORE IMAGES 

·  Gas Transmission Typical Application



 DOWNLOADS 

Tube Fitting - Brochure

Installation Instructions
(PDF, 136KB)