FORGOT YOUR DETAILS?

DK-Lok Catalog Search
Request Information
Green Instrument thread Fittings have been developed based on ASME B31.3 for instrumentation and process control in sizes 1/8" to 2". Green Thread and weld fittings have a wrench flat allowing standard Hex wrench assembly. This is one of the Green Pipe fitting benefits.

Male NPT both ends
Unit of Measure

Specifications

Material

 N/A Stainless Steel 316/316L Dual Grade

Dimensions

Thread Type

 N/A NPT

P - Pipe Size

 N/A 3/4

L

 N/A 46.7 mm

E

 N/A 15.7 mm

H - Hex

 N/A 26.9 mm

Material Standards and Temperature Ratings

Bar Stock

 N/A ASTM A276 ASTM A479

Forgings

 N/A ASTM A182 JIS G3214

Temperature Ratings

 N/A 537 ºC998 ºF

Pipe End Pressure Rating

Pipe End Pressure Rating - Male1 N/A 496 bar7200 psig

Pipe End Pressure Rating - Female

 N/A 303 bar4400 psig

Features

N/A

  • Attractive finishes to suit precision equipment
  • Space-saving therefore less-weight design
  • Each fitting is cleaned to remove particles, oil and grease
  • Fine NPT pipe thread construction equals or exceeds the requirement of ASME B1.20.1 to ensure maximum thread engagement
  • Service at greater pressure levels than the traditional class 3000 pipe fitting to ASME B16.11
  • Male pipe threads are capped to be protected from damages
  • Fitting material available in SS316, Brass and Carbon Steel
  • 1
  • Pressure ratings listed are for temperature up to 37.8° C (100°F)
  • Based on Pressure Piping Code ASME B31.3 pressure rating is calculated with an allowable stress value of 20,000 psi for SS316, 10,000 psi for Brass, and 20,000 psi for Carbon Steel.
  • To determine the working pressure in accordance with Power Piping Code ASME B31.1, multiply psig by 0.94. Brass pressure ratings remain the same.
  • Reducing Hex Bushing (GHB) pressure rating is not covered in this table. See the pressure rating in the dimensional table.

REQUEST A QUOTE

TOP