Search Catalog

Green Instrument thread Fittings have been developed based on ASME B31.3 for instrumentation and process control in sizes 1/8" to 2". Green Thread and weld fittings have a wrench flat allowing standard Hex wrench assembly. This is one of the Green Pipe fitting benefits.

Male NPT both ends
Unit of Measure

Specifications

Material

N/A Brass

Dimensions

Thread Type

N/A NPT

P - Pipe Size

N/A 3/4

L

N/A 46.7 mm

E

N/A 15.7 mm

H - Hex

N/A 26.9 mm

Material Standards and Temperature Ratings

Bar Stock

N/A ASTM B16 ASTM B453 JIS H3250

Forgings

N/A ASTM B124 ASTM B283 JIS H3250

Temperature Ratings

N/A 204 ºC399 ºF

Pipe End Pressure Rating

Pipe End Pressure Rating - Male1 N/A 248 bar3600 psig

Pipe End Pressure Rating - Female

N/A 152 bar2200 psig

Features

N/A

  • Attractive finishes to suit precision equipment
  • Space-saving therefore less-weight design
  • Each fitting is cleaned to remove particles, oil and grease
  • Fine NPT pipe thread construction equals or exceeds the requirement of ASME B1.20.1 to ensure maximum thread engagement
  • Service at greater pressure levels than the traditional class 3000 pipe fitting to ASME B16.11
  • Male pipe threads are capped to be protected from damages
  • Fitting material available in SS316, Brass and Carbon Steel

  • 1
  • Pressure ratings listed are for temperature up to 37.8° C (100°F)
  • Based on Pressure Piping Code ASME B31.3 pressure rating is calculated with an allowable stress value of 20,000 psi for SS316, 10,000 psi for Brass, and 20,000 psi for Carbon Steel.
  • To determine the working pressure in accordance with Power Piping Code ASME B31.1, multiply psig by 0.94. Brass pressure ratings remain the same.
  • Reducing Hex Bushing (GHB) pressure rating is not covered in this table. See the pressure rating in the dimensional table.