Search Catalog
        
 All Categories    V15 Series Needle Valves
All Categories > Needle Valves > V15 Series Needle Valves > Item # V15D-F-8R-S  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # V15D-F-8R-S, V15 Series Needle Valves


Forged body, Pressure Rating up to 5000 psig (345 bar)

Integral Bonnet Needle Valves FOR REGULATING and SHUT-OFF




Specifications  · Dimensions  · Design  · Operation  · Factory Test  · Safe Valve Selection

Specifications

Series
9.5 mm Orifice

End Connections
Female ISO Tapered

Size Inlet x Outlet
1/2" Female ISO Tapered x 1/2" Female ISO Tapered

Valve Pattern
Inline

Stem Packing Material
Standard PTFE

Stem
Standard Vee Stem Tip

Handle
Nylon Round Handle

Body Material
Stainless Steel 316


Dimensions

A
99.0 mm

B
38.0 mm

Cv
1.80

D
19.0 mm

E
19.0 mm

H
66.0 mm

H1
76.0 mm

L
76.0 mm

L1
38.0 mm

L2
38.0 mm

Orifice
9.5 mm


Design
  • Designed for a wide range of general purpose in gas and liquid applications
  • Forged Body with Inline and Angle pattern
  • Integral Bonnet design to eliminate inadvertent stem back-out
  • Standard metal seal for pressure tightness at elevated temperatures
  • Standard PTFE packing, and optional PEEK packing for higher temperature service
  • Packing nut allows external packing adjustment to ensure leak-free packing on stem
  • Broad choices of end connections include reliable DK-LOK, NPT & ISO Male & Female pipe threads


Operation
  • Pressure rating up to 5000 psig (345 bar) at 100°F (38°C)
  • Temperature rating up to 450°F (232°C) with standard PTFE packing; up to 600°F (315°C) with optional PEEK packing
  • Panel mounting without packing disruption
  • Standard SS316 and Brass material valve construction
  • DK-LOK Gap gauge allows easy inspection for sufficient tube pull-up before a system is pressurized
  • Valves for Sour Gas Service meeting the requirements of NACE MR0175 are available


Factory Test
    Every valve is tested with the nitrogen at 1000 psig (68 bar) for leakage at the seat to a maximum allowable leak rate of 0.1 SCCM. The packing is tested for no detectable leakage.


Safe Valve Selection
    The selection of a valve for any application or system design must be considered to ensure safe performance.Valve function, valve rating, material compatibility, proper installation, operation and maintenance remain the sole responsibillty of the system designer and the user. Dk Tech accepts no liability for any improper selection, installation, operation or maintenance.


 MORE IMAGES 

·  Materials of Construction

·  Panel Mounting

·  Pressure-Temperature Ratings



 DOWNLOADS 

V15 Series Needle Valves