Dk-Lok USA
Dk-Lok USA
161 West I-65 Service Road
Mobile, AL 36608
Phone: (251) 472-9580
Fax: (251) 450-0962 or (800) 287-8186
[email protected]
Print Back
Design

D-Pro VPV Series Purge Valves are designed for manually bleeding, venting, or draining system fluids. The cap is clamped to the valve body for safety in use. The 0.063 inch (1.6 mm) diameter vent hole is constructed on the cap.

Operation and Installation Instruction

D-Pro VPV series purge valve requires a quarter turn of cap with a wrench from finger-tight for a leak-tight seal on the first make-up. To ensure seal to the rated pressure, snug with a wrench. Always open the valve slowly. These valves have no seal on cap. Therefore media may flow through the cap thread when the valves are opened. Operating personnel should take suitable measures to be protected from system fluids.
VPV-Series-Purge-Valves
VPV-Series-Purge-Valves-Dimensional-Drawing
Unit of Measure
Items VPV-Series-Purge-Valves
VPV-F-2N-S
VPV Series Purge Valves 		VPV-Series-Purge-Valves
VPV-F-4N-S
VPV Series Purge Valves 		VPV-Series-Purge-Valves
VPV-F-6N-S
VPV Series Purge Valves 		VPV-Series-Purge-Valves
VPV-F-8N-S
VPV Series Purge Valves 		VPV-Series-Purge-Valves
VPV-M-2N-S
VPV Series Purge Valves
Series N/A VPV
End Connection N/A Female NPT N/A Female NPT N/A Female NPT N/A Female NPT N/A Male NPT
End Connection Size N/A 1/8" Female NPT N/A 1/4" Female NPT N/A 3/8" Female NPT N/A 1/2" Female NPT N/A 1/8" Male NPT
Ball Material N/A SS316
Valve Body Material N/A Stainless Steel 316
Temperature Rating N/A -54 to 315°C (-65 to 600°F)
Pressure Rating at 38 ºC (100 ºF) N/A 275 bar (4000 psig)
L N/A 38.1 mm N/A 42.9 mm N/A 44.5 mm N/A 48.8 mm N/A 39.6 mm
h-Hex N/A 14.3 mm N/A 19.1 mm N/A 22.2 mm N/A 27 mm N/A 12.7 mm
H-Hex N/A
H1-Hex N/A 15.9 mm