Print Back
DP Transmitter Calibration fittings
Calibration fitting connects directly to the bleed port of a differential pressure transmitter. This helps simplify the calibration process. Two sizes of threads are available to fit the vent port of Yokogawa/Rosemount, and Honeywell differential pressure transmitters. The conical metal-to-metal sealing face on the straight thread requires no PTFE tape.
DPCM Calibration Fittings
DPCM Calibration Fittings-2
Unit of Measure
Items DPCM Calibration Fittings
DPCM-4-1U-S-S
DPCM Calibration Fittings
DPCM Calibration Fittings-2
DPCM-4-2U-S-S
DPCM Calibration Fittings
DPCM Calibration Fittings
DPCM-4-1U-S-B
DPCM Calibration Fittings
DPCM Calibration Fittings-2
DPCM-4-2U-S-B
DPCM Calibration Fittings
DPCM Calibration Fittings
DPCM-4-1U-S-C
DPCM Calibration Fittings
Material N/A Stainless Steel 316/316L N/A Stainless Steel 316/316L N/A Brass N/A Brass N/A Carbon Steel
Moly Coating N/A None
D - Tube O.D. N/A 1/4 in6.4 mm
Thread Type N/A U
T - Straight Thread Size N/A 1/4-28 N/A 5/16-24 N/A 1/4-28 N/A 5/16-24 N/A 1/4-28
E N/A 4.8 mm
E1 - Min. N/A 1 1/2 mm
h - Width Across Flat N/A 1/2 in12.7 mm
H - Width Across Flat N/A 9/16 in14.3 mm
A N/A 15.2 mm
B N/A 17.8 mm
L N/A 43.1 mm N/A 59.2 mm N/A 43.1 mm N/A 59.2 mm N/A 43.1 mm
L1 N/A 19.9 mm N/A 35.8 mm N/A 19.9 mm N/A 35.8 mm N/A 19.9 mm