Print Back
Di-electric tube fitting is designed to apply where electrical current flowing through a pipe or tubing line must be interrupted to protect instruments.
Di-electric Tube fitting is commonly used in the natural gas transmission station where installed on impulse lines ahead of stations. This fitting interrupts cathodic current flow while permitting full fluid flow.
DEU Dielectric Fittings
Unit of Measure
1 2 3 

Item #

Material

D - Tube O.D.

E - Min.

h - Width Across Flat

H - Width Across Flat

L

CAD

DEU-4-TI N/A Titanium Gr. 2 N/A 1/4 in6.4 mm N/A 0.190 in4.8 mm N/A 1/2 in12.7 mm N/A 9/16 in14.3 mm N/A 95.8 mm N/A CAD Icon (for items table)
DEU-6-TI N/A Titanium Gr. 2 N/A 3/8 in9.5 mm N/A 0.280 in7.1 mm N/A 5/8 in15.9 mm N/A 11/16 in17.5 mm N/A 99.6 mm N/A CAD Icon (for items table)
DEU-8-TI N/A Titanium Gr. 2 N/A 1/2 in12.7 mm N/A 0.280 in7.1 mm N/A 13/16 in20.6 mm N/A 22.2 mm N/A 106.0 mm N/A CAD Icon (for items table)
DEU-12M-TI N/A Titanium Gr. 2 N/A 12 mm N/A 0.280 in7.1 mm N/A 22.0 mm N/A 7/8 in22.0 mm N/A 107.0 mm N/A CAD Icon (for items table)
DEMC-6-4N-TI N/A Titanium Gr. 2 N/A 3/8 in9.5 mm N/A 0.280 in7.1 mm N/A 5/8 in15.9 mm N/A 11/16 in17.5 mm N/A 94.7 mm N/A CAD Icon (for items table)
DEU-4-PE N/A PTFE N/A 1/4 in6.4 mm N/A 0.190 in4.8 mm N/A 1/2 in12.7 mm N/A 9/16 in14.3 mm N/A 95.8 mm N/A CAD Icon (for items table)
DEU-6-PE N/A PTFE N/A 3/8 in9.5 mm N/A 0.280 in7.1 mm N/A 5/8 in15.9 mm N/A 11/16 in17.5 mm N/A 99.6 mm N/A CAD Icon (for items table)
DEU-8-PE N/A PTFE N/A 1/2 in12.7 mm N/A 0.280 in7.1 mm N/A 13/16 in20.6 mm N/A 22.2 mm N/A 106.0 mm N/A CAD Icon (for items table)
DEU-12M-PE N/A PTFE N/A 12 mm N/A 0.280 in7.1 mm N/A 22.0 mm N/A 7/8 in22.0 mm N/A 107.0 mm N/A CAD Icon (for items table)
DEMC-6-4N-PE N/A PTFE N/A 3/8 in9.5 mm N/A 0.280 in7.1 mm N/A 5/8 in15.9 mm N/A 11/16 in17.5 mm N/A 94.7 mm N/A CAD Icon (for items table)
Unit of Measure
1 2 3